| Split-Face Masonry Units shall be
manufactured by Smithtown Concrete Products Corp., Jericho
Turnpike, Smithtown, New York 11787. All architectural
load-bearing masonry units shall meet A.S.T.M. Specification
C-90-98. The units shall be of high strength concrete with a
net area compressive strength of 3500 PSI. These masonry units shall be manufactured with an
integral water-repellent so that when a broken concrete texture faces up and a 1"
diameter droplet of water is placed on its surface, the water will stay bubbled up on
the concrete surface for a period of no less than four hours.
Units may be colored with integrally mixed, light-fast,
weather-resistant, pigment. Color shall be maintained uniformly throughout the job
within normal manufacturing tolerances.
Various aggregates and cements are available to meet design
needs of the architect.
You did not come here from a Masonry Block page. These specs are general, and may be modified somewhat for specific Masonry Block |
